panowie,może już gdzieś był poruszony temat,ale nigdzie nie mogę się doczytać.mianowicie mam pytanie odnośnie świateł stopu.po wciśnięciu hamulca zaświeca mi się poprostu jaśniej światło pozycyjne+plus za szybą,no i ok,ale dlaczego nie zaświecają mi się diody na górze???rozebrałem lampę i oddzielnie podłączyłem się do tych dwóch kabelków(czerw. i czar.)i działają diody.specjalnie je wysunąłem żeby przy zatrzaśnięciu lampy styki się połączyły i nic
auto sprawne bo stop ma,ale jak się lata na dziennych to diody by się przydały.proszę o pomoc
światło stopu
pikul123, to wina kodowania. Zmieniłeś może lampy? Na wersje .us?
Kolega igo_89 miał taki sam problem. Napisz do niego to Ci podpowie co zrobić...
Kolega igo_89 miał taki sam problem. Napisz do niego to Ci podpowie co zrobić...
To także można przekodować, aby nie świecił się tył, gdy masz dzienne Spora oszczędność energii... masz tam 6 zwykłych żarówekpikul123 pisze:ale jak się lata na dziennych to diody by się przydały
-
- Forum Audi A6 / A7
- Posty: 1099
- Rejestracja: 28 sie 2011, 19:34
- Imię: Marcin
- Moje auto: A6 C6
- Rocznik: 2004
- Nadwozie: Limuzyna
- Silnik: 3.0 ASN 220KM
- Napęd: Quattro
- Skrzynia: Tiptronic
- Paliwo: Diesel
- Lokalizacja: OSTROWIEC ŚW.
Może to coś pomoże :wiki ross tech http://wiki.ross-tech.com/wiki/index.ph ... lectronics Audi A6 (4F) Central Electronics
Contents 09
[hide]
1 Coding
2 Security Access
3 Adaptation
3.1 Channel 014: Daytime Running Lights
3.2 Channel 016: Rear Wiper Comfort Function
4 Basic Setting
4.1 Steering Column Adjustment
Coding
0?xxxxx: Steering Column Memory
0 = Steering Column Memory not installed or manual Steering Column
1 = Steering Column Memory installed
0x?xxxx: Footwell Lightning
0 = Footwell Lightning using Light Bulbs
1 = Footwell Lightning using LED's
0xx?xxx: Headlight Type
0 = Halogen Headlights w/o Headlight Washer System
1 = Halogen Headlights with Headlight Washer System
2 = Bi-Xenon Headlights
3 = Bi-Xenon Headlights with AFS
4 = Bi-Xenon Headlights w/o Headlight Washer System
5 = LED Daytime Running Lights with Headlight Washer System
6 = LED Daytime Running Lights w/o Headlight Washer System
0xxx?xx: Automatic Driving Light
0 = w/o Automatic Driving Light (Auto)
1 = with Automatic Driving Light (Auto) with Rain/Light Sensor (G397)
0xxxx?x: Daytime Running Lights
0 = w/o Daytime Running Lights
1 = with Daytime Running Lights (not selectable via MMI)
2 = with Daytime Running Lights (selectable via MMI)
0xxxxx?: Country
1 = Rest of World (RoW)
2 = Northern European Countries (Sweden/Finland/Norway/Denmark)
3 = USA
4 = Canada
Security Access
12151 = General Adaptation "Enabling"
Adaptation
Channel 014: Daytime Running Lights
Channel 016: Rear Wiper Comfort Function
0 = Rear Wiper not active with Front Wipers and Reverse Gear engaged
1 = Rear Wiper active with Front Wipers and Reverse Gear engaged
Basic Setting
Steering Column Adjustment
Prerequisites:
Steering Column or the Central Electronics Control Module (J519) have been replaced.
Approach all 4 end positions (up, down, forward, back).
[Select]
[09 - Central Electronics]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
[Close Controller, Go Back - 06]
Contents 09
[hide]
1 Coding
2 Security Access
3 Adaptation
3.1 Channel 014: Daytime Running Lights
3.2 Channel 016: Rear Wiper Comfort Function
4 Basic Setting
4.1 Steering Column Adjustment
Coding
0?xxxxx: Steering Column Memory
0 = Steering Column Memory not installed or manual Steering Column
1 = Steering Column Memory installed
0x?xxxx: Footwell Lightning
0 = Footwell Lightning using Light Bulbs
1 = Footwell Lightning using LED's
0xx?xxx: Headlight Type
0 = Halogen Headlights w/o Headlight Washer System
1 = Halogen Headlights with Headlight Washer System
2 = Bi-Xenon Headlights
3 = Bi-Xenon Headlights with AFS
4 = Bi-Xenon Headlights w/o Headlight Washer System
5 = LED Daytime Running Lights with Headlight Washer System
6 = LED Daytime Running Lights w/o Headlight Washer System
0xxx?xx: Automatic Driving Light
0 = w/o Automatic Driving Light (Auto)
1 = with Automatic Driving Light (Auto) with Rain/Light Sensor (G397)
0xxxx?x: Daytime Running Lights
0 = w/o Daytime Running Lights
1 = with Daytime Running Lights (not selectable via MMI)
2 = with Daytime Running Lights (selectable via MMI)
0xxxxx?: Country
1 = Rest of World (RoW)
2 = Northern European Countries (Sweden/Finland/Norway/Denmark)
3 = USA
4 = Canada
Security Access
12151 = General Adaptation "Enabling"
Adaptation
Channel 014: Daytime Running Lights
Channel 016: Rear Wiper Comfort Function
0 = Rear Wiper not active with Front Wipers and Reverse Gear engaged
1 = Rear Wiper active with Front Wipers and Reverse Gear engaged
Basic Setting
Steering Column Adjustment
Prerequisites:
Steering Column or the Central Electronics Control Module (J519) have been replaced.
Approach all 4 end positions (up, down, forward, back).
[Select]
[09 - Central Electronics]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
[Close Controller, Go Back - 06]
Tooles.pl - Sklep z elektronarzędziami
Aeratory do trawnika marki Stiga