Strona 1 z 1

Audi A6 C7 tdi 2014r MMI Plus

: 15 cze 2019, 08:14
autor: Slawekm1978
Witam. czy jest mozliwosc uruchomienia video podczas jazdy za pomocą skryptu ? dziekuje

: 15 cze 2019, 08:57
autor: zekering78
Jest <lol>
Trzeba się troszkę więcej wysilić :p

: 15 cze 2019, 09:10
autor: carlos777
Jak nie masz VCP to zapraszam do mnie na W-ch.
Też walczyłem z tym tematem.

: 15 cze 2019, 10:00
autor: Slawekm1978
zekering78 pisze:Jest <lol>
Trzeba się troszkę więcej wysilić :p
niestety nie mogę namierzyć :|

: 16 cze 2019, 20:20
autor: zekering78
Slawekm1978 pisze:
zekering78 pisze:Jest <lol>
Trzeba się troszkę więcej wysilić :p
niestety nie mogę namierzyć :|
Pierwsza strona w Ciekawe kodowania

Kod: Zaznacz cały

7. Aktywacja Video In Motion 
Video In Motion - prevent the car from suppressing DVD playback once the speed of the car rises above 5mph 
I used the same technique as in my C6 with MMI 3G. These are the steps I followed&#58; 
&#91;Select&#93; 
&#91;5F-Information Electr.&#93; 
&#91;Advanced ID - 1A&#93; 
Make a note of the Serial Number 
Go to Enable VIM TV-playback using VCDS/VAG-COM in your Audi MMI | trick77.com 
Follow the link for MMI 3G 
Enter your serial number into the input field 
Make a note of the personal login code and the alternative login code it returns 
&#91;Security Access - 16&#93; 
Enter your personal login code. 
&#91;Do it!&#93; 
If you receive a "code not valid" message try the alternative code. If neither code works it's likely that your control module doesn't support VIM adaptation. 
&#91;Adaptation - 10&#93; 
Select channel 48 
Press read 
Set the value from 0 to 255 
Press test 
Press save 
Press "Done, Go Back" 
Close VCDS and reboot your MMI as detailed in step 5 above 
This works as expected.

: 17 cze 2019, 09:50
autor: Slawekm1978
Ale to nie jest skrypt :(

: 17 cze 2019, 17:07
autor: zekering78
Trzeba vcds użyć

: 17 cze 2019, 17:23
autor: Zbichu
Slawekm1978 pisze:Ale to nie jest skrypt :(
Tak to już jest. Jak zapytasz np. że chcesz kupić sedana 3.0 V6 to natychmiast pojawi się szereg ofert z kombiakami 2.0 <lol> ,a sedana ni ch*ja <lol>
Skryptem VIM nie uruchomisz.

: 17 cze 2019, 18:01
autor: Slawekm1978
ok dziekuje .

: 17 cze 2019, 21:16
autor: carlos777
Pytanie czy masz MMI czy MIB.

: 17 cze 2019, 21:28
autor: Slawekm1978
mam MMI 3g+

: 18 cze 2019, 02:55
autor: carlos777
Można na piechotę generując kod ze strony.

https://trick77.com/tools/mmi3g_vimcode.php

ttps://trick77.com/wp-content/uploads/2008/01/VIMGenSetup.msi

Można też w parę sekund ogarnąć VCP.